PPWR heavy metals limit: what to ask your packaging suppliers
Verified on 20 November 2026 against Regulation (EU) 2025/40 · Relies on: Articles 5(4), 5(6), 16, 70(3); Annex VII
Ask each packaging supplier for a signed declaration, per component, that the combined concentration of lead, cadmium, mercury and hexavalent chromium is 100 mg/kg or less, with the evidence behind it. The limit is in Article 5(4) and has applied since 12 August 2026, to the packaging and to every packaging component. You must show compliance in your technical documentation (Art. 5(6)), and your suppliers must give you the information you need to do so (Art. 16(1)).
The rule in one table
| Point | Detail | Article |
|---|---|---|
| Substances | Lead, cadmium, mercury, hexavalent chromium | Art. 5(4) |
| Limit | Sum of all four at or below 100 mg/kg | Art. 5(4) |
| Scope | The packaging and each packaging component, including inks, coatings, adhesives and labels | Art. 5(4) |
| Applies from | 12 August 2026 | Art. 71 |
| Proof | In the technical documentation | Art. 5(6), Annex VII |
| Supplier duty | Provide the information and documents you need | Art. 16(1) |
| Existing derogations | Glass packaging, and plastic crates and pallets, under earlier Commission decisions that remain in force | Art. 70(3) |
The same 100 mg/kg limit applied under the old Packaging Directive. What is new is that you must hold the evidence in a PPWR technical file and sign a Declaration of Conformity on it.
What to ask for
| Field in the supplier declaration | Why you need it |
|---|---|
| Supplier name, address and signatory | So the declaration is attributable |
| Component name, part number and specification revision | Ties the evidence to the exact component in your bill of materials |
| Statement that Pb + Cd + Hg + Cr(VI) ≤ 100 mg/kg | The requirement itself |
| Basis: test report, or formulation and raw-material knowledge | Authorities can ask how the supplier knows |
| Test method and laboratory, if tested | Lets you judge the evidence |
| Scope: every layer, ink, coating, adhesive and label on the component | Components often fail on inks or pigments, not the base material |
| Date and validity, and a promise to tell you about changes | Your declaration must stay current (Art. 39(2)) |
| Any derogation relied on | Glass or plastic crates and pallets only |
While you are asking, ask for the rest
The same request can collect what your file will need later:
- Material composition and weight of each component, for minimisation (Art. 10) and recyclability (Art. 6)
- Recycled plastic content, if any (Art. 7)
- For food-contact packs: PFAS evidence (Art. 5(5))
- Documentation required by other EU laws for contact-sensitive packaging (Art. 16(2))
One well-built request now saves three rounds of chasing later.
Where it usually goes wrong
- A declaration for the base material only, with nothing on inks, coatings or adhesives
- A generic "we comply with all EU laws" letter with no component, limit or basis
- Evidence for an old specification revision
- No owner on your side to chase replies. This step is the slowest in most projects
Want the supplier chase done for you? Our Conformity Sprint drafts, sends and tracks every request.
Book an Exposure ScanSources: Regulation (EU) 2025/40 (OJ L, 22.1.2025). General information, not legal advice.