Answers

PPWR Declaration of Conformity: what goes in it and who signs

Verified on 20 November 2026 against Regulation (EU) 2025/40 · Relies on: Articles 15, 17, 38, 39; Annexes VII and VIII

The PPWR EU Declaration of Conformity is a signed statement that a packaging type meets the requirements of Articles 5 to 12. It is required by Article 39, follows the model in Annex VIII, and is signed by the manufacturer, who takes legal responsibility by signing it (Art. 39(4)). It must be backed by technical documentation built under Annex VII, drawn up for each packaging type, kept up to date, and kept for 5 years (single-use) or 10 years (reusable).

Note on article numbers: some guides cite the Declaration under Annex VII or Annex VIII alone. The duty is in Article 39. Annex VII sets the procedure behind it (Module A, internal production control). Annex VIII sets its layout.

What goes in it (Annex VIII)

FieldWhat to write
Declaration numberA unique ID for the declaration
Packaging identificationType, batch or serial number of the packaging
ManufacturerName and address, and the authorised representative's if you have one
Responsibility statementThat the declaration is issued under the manufacturer's sole responsibility
Object of the declarationA description of the packaging that allows it to be traced
Conformity statementThat it conforms to the PPWR and any other EU laws applied
Standards and specificationsThe harmonised standards, common specifications or other technical specifications used
Notified bodyWhere applicable. Normally not applicable under Module A
Additional informationAnything else relevant, such as exemptions relied on
Signature blockSigned for and on behalf of; place and date; name and function

It must be written in, or translated into, the language each EU country where the packaging is sold requires (Art. 39(2)).

What must stand behind it (Annex VII technical documentation)

ElementExample for a typical pack
General description and intended use"Folding carton, 350 gsm board, sales packaging for product X"
Design, drawings, materials of each componentDrawings, bill of materials, layer structure
Explanations needed to read the drawingsAssembly and closure notes
Standards and specifications appliedTest methods used
How the recyclability, minimisation and reuse assessments were doneRequired as each rule takes effect
Test reportsHeavy-metal results or supplier evidence
Analysis of the risk of non-conformityWhich requirement could fail, and why it does not

If you rely on an exemption, such as the medical device relief from recyclability, record that in the technical documentation too. The Commission's FAQ says exemptions must be assessed and documented.

Who signs

RoleWhat they do with the DeclarationArticle
ManufacturerDraws it up and signs it. Takes responsibility for complianceArt. 15(2), 39(4)
Authorised representative (optional)Can keep it and the file for authorities, if the mandate says so. Cannot take over the duty to draw up the technical documentationArt. 17(2)
ImporterChecks the manufacturer has done it, keeps a copy for authoritiesArt. 18(2), 18(7)
Consultant, lab or AICan prepare it. Carries no legal responsibilityCommission guidance, 2026

The Commission's guidance is plain on this point: whoever drafts it, the manufacturer alone is legally responsible.

How many declarations do you need?

One per packaging type. The Commission's FAQ says one declaration can cover several sizes only if the size difference does not change compliance with any requirement. Different packaged products usually mean different declarations.

If your product already has an EU declaration under another law, you can combine them into one declaration or one dossier, as long as each law is listed (Art. 39(3)).

Common mistakes

Want your declarations drafted and reviewed?

Book an Exposure Scan

Sources: Regulation (EU) 2025/40 (OJ L, 22.1.2025); European Commission guidance document, 30 March 2026; DG ENV PPWR FAQ, March 2026. General information, not legal advice.